New Olympus EPOCH 6LT Portable Flaw Detector

Product Description

New Olympus EPOCH 6LT Portable Flaw Detector

The Olympus EPOCH 6LT Ultrasonic Flaw Detector’s one-hand grip and small weight of 1.95 pounds (890g) make it a perfect one-hand operable flaw checking tool for rope access applications.

The EPOCH 6LT can be operated with the free hand. Just attach the instrument to your leg or harness and use the side strap to hold it while climbing, switching to the alternate portrait perspective if needed.

A-scans can be read in any light because to the bright, crisp screen, and the button layout is made as simple as possible. The EPOCH 6LT units from Olympus are drop tested and designed to comply with IP65/67 standards.

Specifications

General

• User Interface Languages: English, Spanish, French, German, Japanese, Chinese, Portuguese, Russian, Italian
• Transducer connections: LEMO 00
• Data storage: 100,000 IDs onboard
• Battery type and life: Single lithium-ion rechargeable standard; 6 h life
• Power requirements: AC Mains: 100 VAC to 120 VAC, 200 VAC to 240 VAC, 50 Hz to 60 Hz
• Display dimensions (W × H, Diag.): 117 mm × 89 mm, 146 mm (4.62 in. × 3.49 in., 5.76 in.)
• Weight: 890 g (1.95 lb.), including lithium-ion battery

Instrument Inputs/Outputs

• USB ports: (1) USB 1.1 Full Speed Host (Type A) and (1) USB 2.0 Full Speed Client (Type Mini B)
• Video output: 1 digital video output

Environmental Ratings

• IP rating: Ingress Protection (IP) engineered to IP67 (dust tight and water submersion) and IP65 (dust tight and water jets) per IEC
• 60529-2004 (Degrees of Protection provided by enclosures—IP Code).
• Explosive atmosphere: MIL-STD-810F, Method 511.4, Procedure 1
• Shock tested: MIL-STD-810F, Method 516.5, Procedure I, 6 cycles each axis, 15 g, 11 ms half sine
• Vibration tested: MIL-STD-810F, Method 514.5, Procedure I, Annex C, Figure 6, general exposure: 1 hour each axis.
• Operating temperature: -10 °C to 50 °C (14 °F to 122 °F)
• Battery storage temperature: 0 °C to 50 °C (32 °F to 122 °F)

Pulser

• Pulser: Tunable square wave
• PRF: 10 Hz to 2000 Hz in 10 Hz increments
• Energy settings: 100 V, 200 V, 300 V, or 400 V

Receiver

• Gain: 0 to 110 dB
• Maximum input signal: 20 Vp
• Receiver input impedance: 400 Ω ± 5%
• Rectification: Full-Wave, Positive Half-Wave, Negative Half-Wave, RF
• System linearity: Horizontal: ± 0.5% FSW
• Measurement rate: Equivalent to PRF in all modes (single shot)

Gates

• Measurement gates: 2 fully independent flaw gates
• Gate start: Variable over entire displayed range
• Gate width: Variable from 0.040 microseconds to end of displayed range
• Gate height: Variable from 2 to 95% full screen height in 1% increments

Measurements

• Measurement display locations: 5 locations available (manual or auto selection)
• Echo-to-echo: Standard gate 2 – gate 1
• DAC/TCG: Standard, up to 50 points, 110 dB dynamic TCG range
• Special DAC modes: Custom DAC (up to 6 curves), 20–80% view

Includes:

• Olympus Epoch 6LT Unit
• Charger and AC Cable
• Lithium Ion Battery
• USB Data Cable
• USB Manual
• Hard Padded Transport Case